All TEC Conveyors have been designed to be low maintenance, with a hygienic and soft product handling for a 24/7 lights off operation.

Our conveyors are designed in the following formats: Horizontal, Inclined, Declined, Horizontal to Inclined, Inclined to Horizontal and “Z” Type or Horizontal to Inclined to Horizontal. The required format is chosen by our engineering team making the most efficient and simple operation and use of space to cover the requirements.

TEC Engineering Bulk Conveyors include the following features:

 

All TEC conveyors include the following features:

  • Frame: 12ga stainless steel modular construction in 10 ft. sections or less. UHMW wear strips at length of conveyor.
  • Side Rails: 18ga stainless steel modular construction in 8" to 20” high by 10ft sections or less.
  • Top cover supports: 18ga stainless steel separators on 4ft centers, bolted on the side rails.
  • Top dust covers: 18ga stainless steel or 1/8" Lexan (clear polycarbonate) in "snap in/out" 4 ft. sections.
  • Bottom dust covers: 18ga stainless steel in 8 or 10 ft. sections bolted to frame bottom with press nuts and 1/4" bolts.
  • End dust covers: 18ga stainless steel construction, installed on the frame on the tensioning arm end of the conveyor.
  • Conveyors transition: 16ga stainless steel, tig welded, steel hopper. Completely enclosed.
  • Standard frame unions: 3/16" galvanized plates installed in the frame interior (not visible).
  • Frame stiffeners: 1 1/2" galvanized tubular steel installed in the frame interior (not visible).
  • Supports: Adjustable and leveling 12 and 14ga sheet metal floor or ceiling supports, galvanized.
  • Fasteners: Grade #5 3/8", 5/16" and 1/4" galvanized bolts of the appropriate length. Nylock nuts all around.
  • Bearings: heavy duty, self-aligning bearing (Browning brand) for 1", 1 1/4" and 1 3/8" shafts.
  • Motor: Sumitomo, 220/440 V AC, three phase.
  • Gear box: Sumitomo Brand.

 

PVC Belt Conveyors

  • Rollers: Heavy duty welded, galvanized, steel rollers of the required width. 4" diameter roller, 1/4" polyurethane covering, for conveyors longer than 10ft or any bi-directional, with machined center groove for tracking.
  • Belt: Single ply, Black PVC with woven Polyester carcass. Temperature range 0 to 180°F. Fire, acid and oil resistant. Less than 2% stretch.
  • Cleats:
  • 3/8" high on 120" centers, when required, for Horizontal conveyors.
  • 2” high on 18" centers, for inclined conveyors.

 

Intralox Belt Conveyors

  • UHMW wear strips at length of conveyor.
  • Rollers: Heavy duty welded, galvanized, steel rollers of the required width. 1 1/4" Square shaft with traction sprockets.
  • Belt: Intralox gray polypropylene series 900
  • Flush grid. (Horizontal conveyors)
  • Flat top (inclined conveyors)
  • Cleats:
  • Friction Top 3/8" high on 120" centers, when required, for Horizontal conveyors.
  • 2” high rigid cleats on 18" centers, for inclined conveyors.